Threaded joints used in low pressure small bore & non flammable service
Valve selection according to (Function, Pressure drop, Work temperature, Closing time, Type of joint, Seat tightness, Type of seat, Type of medium, Materials, Design
& operating condition)
Strainers used to protect equipment sensitive from dirt or other particles carried by fluid
Design pressure safe for short occasional or short operating periods if higher than design pressure if loop pressure less than (Y SA max allowable pressure)
Y = 15% if event less than continuous 8 hrs/day or 800 hr/year
Y = 20% if event less than continuous 1 hrs/day or 80 hr/year
Maximum sustained pressure + occasional pressure + transient pressure less or equal design pressure by code
Use FOT(flat on top) eccentric reducers in pump suction line to avoid accumulation of gas pockets.
Use eccentric reducers are for slurry systems and where it is imperative to totally drain ALL condensed fluid, eccentric reducers can avoid small “dead spots” that
exist behind concentric reducers
Expansion joint used to absorb thermal expansion if the use of expansion loops is undesirable or impractical
Valve selection according to (pressure drop, seat leakage, fluid properties, system leakage, actuation requirements, initial cost & maintenance)
Stop valve=Isolation valve=Division valve & can be (gate, globe, ball, butterfly, plug & diaphragm)